Further minimal improvements, reducing code base

1 files changed, 30 insertions, 30 deletions

diff --git a/_posts/2022-03-14-eero.md b/_posts/2022-03-14-eero.md
index 139022b..367bc07 100644
--- a/_posts/2022-03-14-eero.md
+++ b/_posts/2022-03-14-eero.md
@@ -26,18 +26,18 @@ Before we get into the step-by-step details, here are the required items you'll
 
 Before you place your microSD card into the Pi and boot it up, connect it to your local computer (via USB adapter) - we will need to add some files first. Once loaded into the `boot` folder, add an empty file simply called `ssh` (no extensions). Next open your preferred text editor and enter the following code, editing the content to match your own country code and home network settings:
 
-
-    country=US
-    ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
-    update_config=1
-    
-    network={
-        ssid="WIFI_SSID"
-        scan_ssid=1
-        psk="WIFI_PASSWORD"
-        key_mgmt=WPA-PSK
-    }
-
+```sh
+country=US
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
+update_config=1
+
+network={
+    ssid="WIFI_SSID"
+    scan_ssid=1
+    psk="WIFI_PASSWORD"
+    key_mgmt=WPA-PSK
+}
+```
 
 Save this file as `wpa_supplicant.conf` and add it to the `boot` directory as well.
 
@@ -47,9 +47,9 @@ You can now safely eject the microSD card and place it into your Raspberry Pi.
 
 Connect power to your Pi and give it a bit of time to boot up. Once you see a nice solid green LED, go back to your local computer's terminal and enter the following command:
 
-
-    ssh pi@raspberrypi.local
-
+```sh
+ssh pi@raspberrypi.local
+```
 
 If everything was set up properly you will be asked to trust this device. Next, you will be prompted to enter the device password. The default password will be: `raspberry`
 
@@ -57,21 +57,21 @@ If everything was set up properly you will be asked to trust this device. Next,
 
 Once you are connected directly to the Pi, it's best to check for updates:
 
-
-    sudo apt update
-
+```sh
+sudo apt update
+```
 
 ...and if updates are in fact available, install them via:
 
-
-    sudo apt upgrade
-
+```sh
+sudo apt upgrade
+```
 
 This next step is optional but I highly recommend it for security purposes. You should change both the hostname and password of this soon-to-be Pi-hole server. To do this simply run:
 
-
-    sudo raspi-config
-
+```sh
+sudo raspi-config
+```
 
 1. Edit Hostname: navigate to `System Settings` --> `Hostname`
 2. Edit Password: navigate to `System Settings` --> `Password`
@@ -82,9 +82,9 @@ Once complete, reboot the Pi. Just remember that when you try to reconnect to th
 
 This is the easy part:
 
-
-    curl -sSL https://install.pi-hole.net | bash
-
+```sh
+curl -sSL https://install.pi-hole.net | bash
+```
 
 Pi-hole runs a full install script that walks you through step-by-step on setting things up. It's best to use the suggested defaults during the install - everything is pretty simple.
 
@@ -92,9 +92,9 @@ Near the end of the setup you'll be show the newly created static IP for this Pi
 
 Once it's finished, shutdown the Pi safely by running:
 
-
-    sudo shutdown now
-
+```sh
+sudo shutdown now
+```
 
 ## Hardware Setup